|
Battery - UTX7A (12 volt, 6 amp)
|
|
Battery - UTX7A-BS (12 volt, 6 amp)
|
|
Battery - UTX9-BS (12 volt, 8 amp)
|
|
|
|
|
|
|
|
OEM Part Number: YTX7A-BS
Type: Sealed AGM
Voltage: 12
Amp Hrs: 6
Dimensions: L 5.94 W 3.46 H 3.66
|
OEM Part Number: YTX7A-BS
Type: Dry Charge AGM
Voltage: 12
Amp Hrs: 6
Dimensions: L 5.91 W 3.43 H 3.78
|
OEM Part Number: YTX9-BS
Type: Dry Charge AGM
Voltage: 12
Amp Hrs: 8
Dimensions: L 5.91 W 3.43 H 4.13
|
|
|
|
Belt - 669-18-30 (Short Case Version)
|
|
Belt - 729-17.5-30 (Long Case Version)
|
|
Belt - 743-20/30 (Gates Brand)
|
|
|
|
|
|
|
|
Belt Size:
669 mm Length
18 mm Width
30 degree tooth angle
FAQ: How do I know if I have a long or short case? The long case measures 17" and the Short case measures 15 7/8" these measurements are base on where the gasket sits on your cvt cover.
|
Belt Size:
729 mm Length
17.5 mm Width
30 degree tooth angle
Compatible with the 729-17-30 belt size.
FAQ: How do I know if I have a long or short case? The long case measures 17" and the Short case measures 15 7/8" these measurements are base on where the gasket sits on your cvt cover.
|
Belt Size:
743 mm Length
20 mm Width
30 degree tooth angle
|
|
|
|
Belt - 743-20/30 (Kevlar) (Gates Brand)
|
|
Belt - 835-20/30 (Gates Brand)
|
|
Belt - 835-20/30 (Kevlar) (Gates Brand)
|
|
|
|
|
|
|
|
Belt Size:
743 mm Length
20 mm Width
30 degree tooth angle
This belt is made with a durable bullet proof Kevlar material and last longer than the stock belt.
|
Belt Size:
835 mm Length
20 mm Width
30 degree tooth angle
|
Belt Size:
835 mm Length
20 mm Width
30 degree tooth angle
This belt is made with a durable bullet proof Kevlar material and last longer than the stock belt.
|
|
|
|
Brake Cable - 74 inch
|
|
Brake Cable - Rear
|
|
Brake Lever - Hydraulic Brake Lever (Right or Left Side)
|
|
|
|
|
|
|
|
|
Brake cable overall length: 74 inches/ 188 cm / 1880 mm
|
Brake cable overall length: 78 inches/ 198.12cm
|
Universal, can be used on either the right or left side.
|
|
|
|
Brake Lever - Left or Right
|
|
Brake Lever Controller - Left controller with switches and brake lever (Female Plug)
|
|
Brake Lever Controller - Left controller with switches and brake lever (Male Plug)
|
|
|
|
|
|
|
|
|
Scooter Left Brake Lever. Compatible with many scooters that use the same style lever.
|
Scooter Left controller with switches and brake lever.
Specification:
Female Plug: 8 pins
Wires: 8 on plug, 2 loose wires
Plugs may come in different colors.
Functions:
High & Low Beam
Turn Signals
Horn
|
Scooter Left controller with switches and brake lever.
Specification:
Male Plug: 8 pins
Wires: 8 on plug, 2 loose wires
Functions:
High & Low Beam
Turn Signals
Horn
|
|
|
|
Brake Lever Switch
|
|
Brake Shoes - Drum Style for 139QMB 50cc Scooters
|
|
Brake Shoes - High Performance 139QMB 50cc Scooters
|
|
|
|
|
|
|
|
Universal brake lever switch for scooters, dirt bikes, atvs and more....
Specifications:
Switch Diameter- 8mm
Switch Length- 31mm
Overall Length- 425.25 mm(16-3/4")
Switch Pin Diameter- 3mm
|
Specifications:
Outer Diameter: 106mm
Thickness: 25mm
|
Specifications:
Outer Diameter: 106mm
Thickness: 25mm
Color may vary from orange to red depending on availability.
|
|
|
|
Brake Shoes - Rear Brake Shoes for the Honda DIO 50
|
|
Brake Switch
|
|
Carburetor - 139QMB 50cc (Kunfu Brand)
|
|
|
|
|
|
|
|
Rear brake drum for the Honda DIO 50
Specification:
Outer Diameter: 91mm
Thickness: 20mm
|
On/off switch, mostly used on front or rear brakes or scooters, atvs, pocket bikes and other applications.
Specifications:
Switch Diameter- 12mm
Switch Length- 17mm
Switch Pin Diameter- 3mm
Wire Length- 425.25 mm(16-3/4")
|
Stock Carburetor for the 49/50cc 139QMB 4-stroke engines.
Click on photo for more info.
|
|
|
|
Carburetor - 139QMB 50cc w/accelerator pump (Kunfu Brand)
|
|
Carburetor Intake Manifold - 139QMB 50cc
|
|
Clutch and bell housing Assembly (Stock) - 139QMB 50cc
|
|
|
|
|
|
|
|
Stock Carburetor for the 49/50cc 139QMB 4-stroke engines.
Click on photo for more info.
|
Intake Manifold for the 139QMB 50cc engines.
Click on photo for more info.
|
Clutch bell housing and clutch assembly for Chinese street legal scooters. This clutch bell housing and clutch assembly fits the 139QMB engine.
|
|
|
|
Clutch Pads - High Performance Clutch 139QMB 50cc and Honda DIO
|
|
Clutch Spring set - 139QMB 50cc High Performance (1000 RPM)
|
|
Clutch Spring set - 139QMB 50cc High Performance (1500 RPM)
|
|
|
|
|
|
|
|
|
Performance Racing Clutch for the 139QMB 49.5/50cc and Honda DIO engine.
|
High performance clutch springs for the GY6 / 139QMB 50cc engine.
Fits the Honda DIO and 50cc Chinese scooters.
|
High performance clutch springs for the GY6 / 139QMB 49cc engine.
Fits the Honda DIO and 50cc Chinese scooters.
|
|
|
|
Clutch Spring set - 139QMB 50cc High Performance (2000 RPM)
|
|
Controller - Start Button and Kill Switch Assembly (Right Side)
|
|
CVT Variator Kit - Scooter Ninja High Performance Teflon Variator Kit 139QMB 50cc
|
|
|
|
|
|
|
|
|
High performance clutch springs for the GY6 / 139QMB 50cc engine.
|
Specifications:
2 functions
kill switch
starter button
4 wire female plug
Has 8mm threaded hole for mirror
|
High performance Teflon variator pulley kit for the 139QMB 50-80cc engine, the Honda Metropolitan, and Ruckus 50cc 4T.
Includes:
Front Pulley
Back Plate
Buffer Slides
3 sets of roller weights 6.5, 7.5g and 8.5g
|
|
|
|
CVT Variator Pulley (Complete Assembly) - 139QMB 50cc
|
|
Cylinder - 139QMB Cylinder Rebuild Kit 49.5/50cc
|
|
Cylinder Head Rebuild Kit - 139QMB
|
|
|
|
|
|
|
|
CVT Variator Complete Assembly for the street legal scooters with the 139QMB 49.5/50cc engine.
Includes:
Roller Weights 8.5 gram
Belt Cooling Fan
Drive Face Spacer/Shaft
Front CVT Variator Pulley
Variator Back Plate
Variator Back Plate Back Slides (set of 3)
Plate Drive Gear
Drive Gear Face
|
|
Cylinder head rebuild kit for GY6 / 139QMB 50cc engine. Includes : Cylinder Head, Cam Shaft, Rocker Arms, Valves and Gaskets. Kit comes with valves installed as shown in the picture.
NOTE: New kit does not come with exhaust port hole shown in photo.
|
|
|
Fig. 3 / Part No. 01 139QMB
Cylinder
|
|
Fig. 3 / Part No. 14, 15 & 16
Piston Ring Set 49cc / 39mm - 139QMB 50cc
|
|
Fig. 7 / Part No. 07
139QMB Starter Clutch
|
|
|
|
|
|
|
|
|
|
Sold as set, Includes:
Part No. 14, 15 and 16
Specifications:
Displacement: 49cc
Diameter: 39mm
|
|
|
|
|
Fuel Petcock - 3-way valve
|
|
Fuel Petcock - 4-way valve
|
|
Fuel Petcock Valve - Version 1
|
|
|
|
|
|
|
|
|
Universal three way valve petcock.
|
Universal four way valve petcock.
|
Universal petcock valve. This valve is usually mounted on the bottom of the gas tank and work on vacuum.
|
|
|
|
Fuel Sensor Unit - Float
|
|
Headlight
|
|
Ignition Coil (Stock) - QMB 50 to GY6 150cc
|
|
|
|
|
|
|
|
|
Float unit, sensor and wiring for the Cyclone street legal scooter or other similar models with the 139QMB Engine.
|
Includes light bulb.
|
Ignition coil for the 4-stroke Chinese street legal scooters. Ignition coil fits the 139QMB/ GY6 125/150cc engine.
|
|
|
|
Key - Blank keys for Chinese scooters and pocket bikes - Version 1
|
|
Key - Blank keys for Chinese scooters and pocket bikes - Version 2
|
|
Key - Blank keys for Chinese scooters and pocket bikes - Version 3
|
|
|
|
|
|
|
|
|
Blank key for Chinese scooters and pocket bikes
|
Blank key for Chinese scooters and pocket bikes
|
Blank key for Chinese scooters and pocket bikes
|
|
|
|
Key - Blank keys for Chinese scooters and pocket bikes - Version 4
|
|
Key - Blank keys for Chinese scooters and pocket bikes - Version 5
|
|
Key Switch Group - C
|
|
|
|
|
|
|
|
|
Blank key for Chinese scooters and pocket bikes
|
Blank key for Chinese scooters and pocket bikes
|
Complete key switch set.
Includes:
Ignition switch
Trunk Lock
|
|
|
|
Lock - Seat Trunk Lock
|
|
Luggage Box - Model 1
|
|
Luggage Box - Model 2
|
|
|
|
|
|
|
|
|
Seat Trunk Lock
|
Universal luggage box for all scooters with rear mounting rack. Includes rear reflector, lock, keys and all mounting hardware. Made from durable black graphite plastic. Easy to install.
Dimensions: 23L X 18W X 12H inches.
|
Universal luggage box for all scooters with rear mounting rack. Includes rear reflector, lock, keys and all mounting hardware. Made from durable graphite plastic. Easy to install.
Dimensions: 17L X 15W X 11H inches.
|
|
|
|
Magneto/Stator - Female Plug w/3 total wires - 139QMB 50cc
|
|
Magneto/Stator - Male Plug 2 wires, plus 2 loose wires - 139QMB 50cc
|
|
Magneto/Stator Drum - 139QMB 50cc
|
|
|
|
|
|
|
|
Specifications:
Total diameter: 88mm
Center inner diameter: 29mm
Center Bolts (center to center): 41mm
Stator: 8 coils
Plug: Female plug with 3 pins
Total Wires: 3
|
Specifications:
Total diameter: 88mm
Center inner diameter: 29mm
Center Bolts (center to center): 41mm
Stator: 8 coils
Plug: Male plug with two wires and 2 loose wires
Total Wires: 4
|
Specifications:
Overall diameter: 109mm
Inner diameter: 90mm
Shaft diameter: 14mm (inside)
Height: 35mm
Inner shaft has a Woodruff key slot
|
|
|
|
Mirror - Square (10mm) - Left
|
|
Mirror - Square (10mm) - Right
|
|
Mirror Set - w/built in turn signals
|
|
|
|
|
|
|
|
Square Mirror Left for 50cc/ 150cc Scooters.
Specifications:
Thread Size: 10mm
Standard clockwise rotation to tighten
|
Square Mirror Right for 50cc/ 150cc Scooters.
Specifications:
Thread Size: 10mm
Standard clockwise rotation to tighten
|
Left & Right Mirror with turn signals for set 50cc - 150cc Scooters.
Specifications:
Mounting Hole: 8.5mm
Bolt: 8mm
Wires: 3
Includes Hardware
Works on Jonway model QT-28 as well as many other Chinese scooters with the same style mirror.
|
|
|
|
Mirrors - Left Side Mirrors for Scooters
|
|
Mirrors - Right Side Mirrors for Scooters
|
|
Rim - Front (2.15-10)
|
|
|
|
|
|
|
|
Left Side Mirror for 50cc/ 150cc Scooters.
Specs:
8mm - Thread Size
Standard clockwise rotation to tighten.
|
Right Side Mirror for 50cc/ 150cc Scooters.
Specs:
8mm - Thread Size
Standard clockwise rotation to tighten.
|
Front Rim
Specifications:
Size: 2.15-10
Material: Aluminum
|
|
|
|
Rim - Rear (2.15-10)
|
|
Rocker Arm Assembly - QMB139 50cc
|
|
Roller Weights 16 X 13 - 139QMB, 49/50cc
|
|
|
|
|
|
|
|
Specifications:
Size: 2.15-10
Material: Aluminum
Uses: Rear Drum Brake
|
Rocker arm assembly for the 50cc 139QMB engine.
|
Roller Weight 16 X 13
Comes as set of 6 weights.
Fits the Honda DIO and 50cc Chinese Scooters.
Sizes: 4g, 4.5g , 5g, 5.5g, 6g, 6.5g, 7g, 7.5g, 8g, 8.5g, 9g, 9.5g, 10g, 10.5g, 11g
|
|
|
|
Roller Weights 18 X 14 - GY6 125/150cc
|
|
SC Tube - 3.50-10
|
|
Slider Weights QMB 49-110cc (16X13)
|
|
|
|
|
|
|
|
Roller Weights 18 X 14 Compatible with the GY6 125cc and 150cc Chinese Scooters
Specifications:
Size: 18mm x 14mm
Weight Choices: 8g, 8.5g, 9g, 9.5g, 10g, 10.5g, 11g, 11.5g, 12g, 12.5g, 13g, 13.5g, 14g, 14.5g, 15g, 15.5g, 16g, 16.5g, 17g, 17.5, 18g
Set of 6 weights
|
Tube with bent valve stem.
Tube Size: 3.50-10
|
These slider weight's replace your stock roller weights. They will help improve your take off speed (low end torque) while increasing your mid range torque, as well as your overall top end speed. This is by far the easiest and cheapest modification you can do to your engine to achieve great results.
SLIDING ROLLER 16 X13
Comes as set of 6 weights.
Fits the Honda DIO and 49cc to 80cc 139QMB engines for Chinese Scooters.
Choose from Sizes: 6g, 7g, 8g, 9g, 10g
|
|
|
|
Spark Plug - NGK Iridium High Performance Spark Plug (CR8HIX)
|
|
Spark Plug - NGK C7HSA (4629)
|
|
Spark Plug - NGK C8HSA (6821)
|
|
|
|
|
|
|
|
Made with Iridium, Stronger than Platinum, Higher melting point.
Requires less voltage to spark, burns more of the fuel in the cylinder, sparks at leaner air/fuel mixtures.
Works on 110-150cc engines.
|
This NGK spark plug is typically used on 50cc-150cc gas scooters engines.
Specifications:
NGK C7HSA
Manufactures Part#: 4629
|
This NGK spark plug is typically used on 50cc-150cc gas scooters engines. Runs hotter than the C78SA spark plug.
Specifications:
NGK C8HSA
Manufactures Part#: 6821
|
|
|
|
Speedometer - 7 Wire Male Plug, 1 loose wire, Retro 150cc
|
|
Speedometer - 8 Wire Male Plug, Retro 49cc
|
|
Speedometer Cable 39" (Version 1)
|
|
|
|
|
|
|
|
Speedometer for 150cc retro style scooter.
Specifications:
Tachometer: MPH 70 - Km/h 120
Plug Type: Male with 7 pin slots and 1 loose wire
Wires: 8
High Beam
Turn Signal
Gas Gauge
|
Speedometer for 49cc retro style scooter.
Specifications:
Tachometer: MPH 50 - Km/h 80
Plug Type: Male with 8 pin slots
Wires: 8
High Beam
Turn Signal
Gas Gauge
|
Speedometer cable for the many street legal scooters that use the same style cable.
|
|
|
|
Speedometer Cable 39" (Version 2)
|
|
Start Button and Headlight Switch Assembly
|
|
Starter Motor - 139QMB 50cc (without wire)
|
|
|
|
|
|
|
|
|
Overall Length: 39 inches/ 99cm
|
Specifications:
3 functions
High Beam
Low Beam
Starter Button
7 wire male plug
|
Specifications:
Mounting Bolts Spacing: 70mm
Center Diameter: 21mm (where o-ring sits)
Shaft/Gear: 7mm with 10 teeth
Overall Diameter: 48mm
|
|
|
|
Starter Solenoid
|
|
Throttle Cable - 71 inch with 90 degree elbows ( Version A)
|
|
Throttle Cable - 75 inch with 90 degree elbows ( Version A)
|
|
|
|
|
|
|
|
Universal fit
12 volt
|
Throttle Cable - 71 inch with 90 degree elbows ( Version A)
|
Throttle Cable - 75 inch with 90 degree elbows ( Version A)
|
|
|
|
Throttle Cable - 75 inch with 90 degree elbows ( Version B)
|
|
Throttle Cable - 80 inch with 90 degree elbows ( Version A)
|
|
Throttle Cable - 80 inch with 90 degree elbows ( Version B)
|
|
|
|
|
|
|
|
|
Throttle Cable - 75 inch with 90 degree elbows ( Version B)
|
Throttle Cable - 80 inch with 90 degree elbows ( Version A)
Note: This cable has a 90 degree bend on both ends with threads on both ends.
|
Throttle Cable - 80 inch with 90 degree elbows ( Version B)
Note: This cable has a 90 degree bend on both ends with threads on carburetor hook up end.
|
|
|
|
Throttle Cable - 86 inch with 90 degree elbows ( Version A)
|
|
Throttle Grip - Left Side
|
|
Throttle Grip - Right Side
|
|
|
|
|
|
|
|
|
Throttle Cable - 86 inch with 90 degree elbows ( Version A)
|
Universal grip (fits left side only).
|
Universal throttle grip (right side). Includes plastic inner tube for throttle cable hook up.
|
|
|
Tire - Zhongya
3.50-10
|
|
Turn Signal Flasher
|
|
Valve set - 139QMB 50cc Engine (complete set)
|
|
|
|
|
|
|
|
Tire Size: 3.50-10
Brand Zhongya
DOT Approved
|
Turn signal flasher for the Cyclone street legal scooter or other similar models with a 139QMB engine.
|
Valve Assembly set for the GY6 / 139QMB 49.5/50cc engine. Valve Size: Big valve 18mm diameter and Small valve 15mm diameter. Includes valve seals.
|
|
|
|
Voltage Regulator, 12volts
|
|
Wire Harness Assembly
|
|
|
|
|
|
|
|
|
12v Voltage regulator for all for all pocket bikes and scooters.
|
Wire harness assembly for the Cyclone street legal scooter.
|
|
|
